THC-B165NC Sawhead driven by servo-motor + Ball screw transmission for cutting (optional)
Feeding safety guard (optional)
Fully feeding safety guard (optional)
Feature
The THC-70NC, THC-B90NC, THC-130NC, THC-165NC High Speed Tungsten Carbide Sawing Machine is designed
and engineered to create optimum cutting performance. It features high speed, high efficiency,
smooth surface of cut and high accuracy. The THC-70NC, THC-B90NC, THC-130NC, THC-165NC is especially
ideal for cutting solid bars and angular steel. Also suitable for cutting steel pipe by using a HSS
sawblade. THC-BNA102NC, THC-NA168NC is especially ideal for cutting aluminum solid bars, angular
aluminum, and aluminum pipe.
THE-A Hydraulic driven sawhead feed for cutting motion. (standard)
THC-B Sawhead driven by servo-motor+Ball screw transmission for cutting. (optional)
THC-NA Hydraulic driven sawhead feed for cutting motion of aluminum and copper
material.(standard)
THC-BNA Server motor+ball screw transmission driven sawhead feed for cutting motion of aluminum and
copper material. (optional)
CONTROL PANEL
The Human-Machine Interface computer controlled POD touch sensing screen assures maximum
operational convenience. All settings are centralized on the screen.
Operation Displays
1. MENU DISPLAY
2. AUTO RUN DISPLAY
3. MACHINE MONITOR DISPLAY
4. MANUAL OPERATION DISPLAY
5. SETTING DISPLAY
Full Equipment Introduction
Fully automatic extra hard tungsten carbide sawing machine
+
Manual stack line up loader or automatic magazinel loader (opt)
+
Automatic hydraulically operated material lifting
+
Servo-motor drive+ ball screw feed transmission
+
Hydraulically operated vise feed
+
Main and top hydraulic vise
A. Hydraulic driven sawhead feed for cutting motion (standard)
B. Sawhead driven by servo-motor+ball screw transmission for cutting (optional)
+
Head and tail pieces separate automatically.
Automatic material outfeed.
The first and second workpieces are outfeed separately.
Head and end pieces are outfeed at left and right sides. (opt)
+
Continuous motion cycles
+
Automatic materisl collection device (optional)
THC-130NC Magazine Feeder
Oil Mist Collector (opt)
THC-130NC Feed system is driven by servo-motor with ball screw
THC-130NC Mist lubrication device
THC-130NC Hydraulically operated vise feed
THC-70NC Angular steel slide assistance device
Specifications
MODEL
THC-165NC
CUTTING CAPACITY
TCT carbide sawblade
Round Solid Bar
mm
● 70 ~ 165
Square Solid Bar
mm
■ 70 ~ 130
Rectangle
mm
80 ~ 120
Square Pipe
mm
--
Square Pipe
mm
--
Maximum Length of Head Cut
mm
10 ~ 50
Waste Material Length at Tail End
mm
85~(85+ cutting length)
Feeding Length
mm
5 ~ 640 Continuous cycles
Manually Stack Line-up Loader Capacity
kg
4600
Material Length
mm
3000 ~ 6000
Material Loading Width
mm
900
MACHINE SPECIFICATIONS
THC-165NC
TCT Carbide Sawblade
mm
460 x 2.3 x t 2.7 std.
480 x 2.3 x t 2.7 opt.
Pin Holes+Bore
mm
4 x 21 PCD 90 x 50
Tip Aluminum Carbide Sawblade
mm
---
Pin Holes + Bore
mm
---
HSS Sawblade
mm
---
Spindle Motor
kw
11 Kw x 6P (15HP x 6P)
Spindle Speeds
rpm
30 ~ 90 rpm.
Frequency Inverter
kw
15 kw (20 HP)
Hydraulic Pump Motor
kw
3.7 kw x 4P (5HP x 4P)
Operation Pressure
mpa
7mpa 70kg/cm2
Oil Tank Capacity
appro 150
Air Pressure
mpa
0. 4 ~ 0.6mpa 4 ~ 6 kg/cm2
Feed Drive
AC servo-motor (1.8kw or 2.0kw) and precision ball screw
Sawhead Drive
A. Material feeding and cutting is driven by hydraulic system.
B. AC servo-motor + ball screw transmission for cutting (optional)
Feeding Vise
Horizontal hydraulic type
Main Vise
Horizontal and vertical hydraulic type, one set each
MACHINE DIMENSIONS AND WEIGHT
THC-165NC
Machine Size
mm
6700 x 2200 x 1900
Weight (Machine+Feeder)
kg
4000+1600
MODEL
THC-165NC
Sawblade Gap Compensation Device
Tungsten Pad for Sawblade Run-out
Chip Removing Steel Brush Wheel
Screw Type Chip Conveyor
Mist Cooling Device
Cutting Fluid Cooling Device
Angular Steel Sliding Device
---
Work Light
Optional Accessories
MODEL
THC-165NC
TCT Carbide Sawblade
HSS Sawblade
---
TIP Aluminum Carbide Sawblade
---
Aluminum Dust Collector
---
Mist Collecting Device
Cutting Fluid
Angular Steel Slicing Device
Cutting Capacity
* The manufacturer always performs product improvements to achieve the best possible
performance.
All specifications, dimensions and design characteristics shown in this catalogue are subject to
change without notice. Product specifications are based on the actual machines. The manufacturer
holds explanation rights.