• Company Profile
• Products
• Contact Us
• Sitemap
• Home

Sawing Machine, Circular Sawing Machine, Chamfering Machine, Saw Blade Sharpener, Metal Circular Saw

• Metal Sawing Machine
  1. Manual Type
  2. Pneumatic Type
  3. Semi-automatic Type
  4. Hydraulic Semi-automatic Type
  5. Air Automatic Type
  6. Hydraulic Automatic Type
  7. CNC Type
• Aluminum/Brass Sawing Machine
  1. Semi-automatic Type
  2. Hydraulic Semi-automatic Type
  3. Air Automatic Type
  4. Hydraulic Automatic Type
  5. CNC Type
• Fully Automatic Circular Sawing Machine
  1. 360FA Series for Steel Cutting
  2. 360AB Series for Steel Cutting
  3. 400FA Series for Aluminum Copper Cutting
  4. 400AB Series for Aluminum Copper Cutting
• Fully Automatic Tungsten Carbide Sawing Machine
  1. THC-A70NC
  2. THC-B70NC
  3. THC-A130NC
  4. THC-B130NC
• Metal Circular Pipe / Bar Stock End Chamfering Machine
  1. Semi-automatic Type
  2. Automatic Type FHC-85EA
  3. Automatic Type FHC-700EA
• Saw Blade Sharpener
  1. HSS Saw Blade Sharpener
  2. TCT Saw Blade Sharpener
  3. Auto Chip Breaker Slot Grinding Machine
• Pipe Shrinking / Expanding Machine
  1. Fully Automatic Pipe Shrinking Machine
  2. Semi-Automatic Pipe Shrinking Machine

Home > Products > Aluminum/Brass Sawing Machine > Semi-automatic Type

Aluminum/Brass Sawing Machine

Semi-automatic Type

45°C Double Miter cut-off Saw

Double sawblades cut simultaneously. Pneumatically operated workpiece clamping. Automatic oil lubrication while in cutting. It saves 2/3 of time than the conventional cutting equipments.

Auto Cutting Machine

• Fully guared sawblade allows safe loading and unloading of workieces.
• Automatic workpiece clamping and cutting off operations are controlled by a foot switch.
• Automatic oil lubrication ensures burr-free cutting quality and long service life of the sawblade.
• Single or multiple workpieces can be cut at a time, making this unit ideal for small lot or high production demands.

Cutting Capacity:

MODEL		FHC-355SA		DB-350	BL-18
Saw Blade Size		355 mm		355 mm	455 mm
Head Swivel		90°	45°	L45R45°	90°	45°
	mm	75	75	75	100x100	100x100
	mm	80	75	75	100	100
	mm	110	75	75	110	110
	mm	110x110	85x85	100x100	100x100	100x100
	mm	110x110	85x85	100x100	100x100	100x100
	mm	110x110	85x85	100x100	100x100	100x100
	mm	110x90	85x60	100x60	150x100	100x100

Specifications:

MODEL		FHC-355SA
Main Drive Motor		5 HP (4 Pole) 50/60 HZ
Blade Speeds		50HZ 3200 RPM 60HZ 3200 RPM
Head Swivel		90° / 45°
Clamping Vise		Double
Coolant Pump Motor		40W
Max. Clamping Capacity		150
Saw Blade Size	Diameter (mm)	TIP 305-355 (12"-14") Standard 355
	Bore (mm)	25.4
	Pin Holes (mm)	---
Operation Pressure		6 kg/cm2 (120 /min)
Machine Dimensions (LxWxH)(mm)		1400x1050x1800
Packing Dimensions (LxWxH)	(mm)	750x1050x1800
	(inch)	30"x42"x60"
Net Weight		340 kgs (748 LBS)
Gross Weight		400 kgs (880 LBS)

MODEL	DB-350	BL-18
Cutting Angle	45° (fixed)	90° & 45°
Maximum Width Of Cut	100 mm	300 mm
Maximum Thickness Of Cut	100 mm	125 mm
Saw Arbor Speed	3440 RPM	3500 RPM
Sawblade Size	355x25.4 Holex80z or 100z or 120z	355-455x25.4 Holex80z or 100z or 120z
Cycle Speed	10-15 cycle/min	10-15 cycle/min
Table Area	812x305 mm	645x688 mm
Table Height From Motor	820 mm	850 mm
Motor	1 HPx2	5 HP
Air Pressure	5 kg/cm2 (120 /min)	5~6 kg/cm2 (120 /min)
Length Of Roller	made to meet the required length
Machine Dimensions	570x840x1300 mm	840x660x1150 mm
Packing Dimensions	1300x890x1500 mm	890x740x1350 mm

* The manufacturer always performs product improvements to achieve the best possible performance. All specifications, dimensions and design characteristics shown in this catalogue are subject to change without notice. ( Products specifications are based on the actual machines. )

- Page Top -