Home > Products > Hydraulic Automatic Type Aluminum Copper > Hydraulic Automatic Type

Hydraulic Automatic Type Aluminum Copper

Hydraulic Automatic Type

FHC-200AC
Hydraulic Automatic Type Aluminum Copper - Hydraulic Automatic Type
Heat Dissipation Pieces Slotting Machine
FHC-400AV
Hydraulic Automatic Type Aluminum Copper - Hydraulic Automatic Type
Hydraulic Automatic Type
Aluminum Copper Cutting Machine
(For-cutting non-ferrous metals)
FHC-200AC
   
Hydraulic Automatic Type Aluminum Copper - Hydraulic Automatic Type Hydraulic Automatic Type Aluminum Copper - Hydraulic Automatic Type Hydraulic Automatic Type Aluminum Copper - Hydraulic Automatic Type
    Sawhead can raise, lower, traverse and cut
FHC-400AV
   
Hydraulic Automatic Type Aluminum Copper - Hydraulic Automatic Type Hydraulic Automatic Type Aluminum Copper - Hydraulic Automatic Type Hydraulic Automatic Type Aluminum Copper - Hydraulic Automatic Type
Floating Feed Device Multiple "V" Clamps Copper Aluminum Cutting Sawhead
     
Hydraulic Automatic Type Aluminum Copper - Hydraulic Automatic Type Hydraulic Automatic Type Aluminum Copper - Hydraulic Automatic Type  
Hydraulically operated saw head for cutting aluminum fully safety guard (Opt.) Dust collection Device (Optional)  
Motion Flow Chart
Hydraulic Automatic Type Aluminum Copper - Hydraulic Automatic Type
Cutting Capacity
MODEL FHC-400AV
Saw Blade Size Diameter355~455 mm
Head Swivel 90°
mm 120
mm 150
mm 150
mm 120x120
mm 120x120
mm 150x120
mm 150x60
Specifications
MODEL FHC-200AC
Slotting blade HSS, 150-200, bore Diameter25.4 (opt, Diameter31.75), T-1-3 m/m up
Slotting Blade 1-20 pcs, (Upon request thickness)
Cut-off Blade HSS, 175-200, bore Diameter25.4 (opt, Diameter31.75), T-1-3 m/m
Cut-off Blade 1 pc, Max 200 mm (opt, 250 mm)
Slotting Height 10-55 mm (opt, 40 m/m以上)
Feed Stroke Length of cut 20-235 mm (height below 30 mm)
  Length of cut 20-145 mm (height range 30-55 mm)
Spacing Collars O.D.40mm J6, I.D.25.4mm H7 Standard
  O.D.45mm J6, I.D.31.75mm H7 Optional
Sawhead Stroke 300 mm
Sawhead Elevation Stroke 100 mm
Width of Material 300 mm
Detachable Arbor NT40# Diameter25.4 (opt, Diameter31.75)
CAPACITY  
Spindle Motor and R.P.M 15 HP, 6 pore R.P.M1200 & 1500(Standard RPM 1500 )
Cooling 1/2 HP & 1/4 HP
Hydraulic Motor 3HP 4P
Hydraulic Pressure 25-45 kg/cm
Cooling Tank Capacity Aabout 114 gallons.

MODEL FHC-400AV
Main Drive Motor 5 HP or 7-1/2HP 4 Pole 50/60 HZ
Blade Speeds 50HZ 3200 rpm / 60HZ 3200 rpm
Head Swivel 90°
Clamping Vise Single
Coolant Pump Motor 40W
Max. Clamping Capacity 150
Saw Blade Size Diameter (mm) TIP Diameter355-Diameter455 Standard Diameter405
Bore (mm) Diameter25.4
Pin Holes (mm) ---
Bar Feeding Length Single Stroke (mm) 5-610 (24")
Double Stroke (mm) 5-1240 (48")
There Stroke (mm) 5-1830 (72")
Bar feeding length ---
Hydraulic Pump Motor 3 HP 4P
Operation Pressure 20-30 kg/cm2
Machine Dimensions (LxWxH) (mm) 1950x1300x2000
Packing Dimensions (LxWxH) (mm) 2200x1300x2200
(inch) 87"x52"x87"
Net Weight 1450 kg (3190 lbs)
Gross Weight 1650 kg (3630 lbs)

* The manufacturer always performs product improvements to achieve the best possible performance. All specifications, dimensions and design characteristics shown in this catalogue are subject to change without notice. Product specifications are based on the actual machines. The manufacturer holds explanation rights.

- Page Top -