Home > Products > Metal Circular Pipe / Bar Stock End Chamfering Machine > Automatic Type

Metal Circular Pipe / Bar Stock End Chamfering Machine

Automatic Type

Chamfering Machine - Automatic Type FHC-700EA Chamfering Machine - Automatic Type FHC-700EA
   

ATF.
Automatic carriage feeder (opt).

 
Chamfering Machine - Automatic Type FHC-700EA  
Features:
  • Designed and engineered for chamfering and trimming inner and outer end angles on circular pipe or bar stock at one time, providing efficient and precise performance.
  • Delicate clamping vise and cutter head ensure high concentricity of results.
  • Specially designed cutter head and standardized cutter make cutter adjustment easy.
Chamfering Machine - Automatic Type FHC-700EA
Optional:
No. Q No. L
1 12~ 27 1 25~200mm
2 16~ 38 2 100~700 mm
3 22 ~ 50 3 100~1000mm
4 38 ~ 60 4 100~1200mm
5 50 ~ 76 5 300~1500mm
    6 300~2000mm
    7 300~2500mm
Standard Cutter, Clamp, Cutter Bit:
Chamfering Machine - Automatic Type FHC-700EA
*Ø16~Ø10Chamfering inner and outer angles
*Ø10~Ø32 Chamfering inner and outer angles		 Chamfering Machine - Automatic Type FHC-700EA
*Optional cutter head Ø5~Ø12		 Chamfering Machine - Automatic Type FHC-700EA
*Standard cutter headØ12~Ø60
Chamfering Machine - Automatic Type FHC-700EA
*Standard cutter head Ø25Ø~80,Ø25Ø150		 Chamfering Machine - Automatic Type FHC-700EA
*Chamfering samples		 Chamfering Machine - Automatic Type FHC-700EA
*Twin head chamfering clamp Ø12~Ø52
Specifications:
MODEL FHC-700EA FHC-1000EA FHC-1200EA
Workpiece length of cut (mm) 115-700 115-1000 115-1200
Spindle Motor 3 HP x 4 P (Standard), 5 HP x 4 P, (2 pcs)(Optional)
Spindle speed (rpm) 50Hz (850-1300), 60Hz (1020-1560 )
Frequency converter 5.5kw~7.5kw(7.5hp~10hp) (Optional)
Air Pressure 6-8 kg/cm2, 120ml/min, 0.6-0.8mpa
Cutterhead Ø12~Ø60 (Standard), Ø25 ~ Ø76 (Optional)
Pipe and bar O.D. outter/I.D. inner angle and end face Ø12~Ø52 (Standard), Ø25~Ø76 (Optional)
Applicable materials Various pipes including steel, iron, stainless steel,
aluminum, bronze
Machine dimensions LxWxH (mm) 2200x1450x1550 2200x1450x1550 2400x1450x1550
Packing dimensions LxWxH (mm) 2300x1520x1600 2300x1520x1600 2500x1520x1650
N.W. 1320 kg 1320 kg 1420 kg
G.W. 1500 kg 1500 kg 1600 kg

MODEL FHC-1500EA FHC-2000EA FHC-2500EA
Workpiece length of cut (mm) 300-1500 300-2000 300-2500
Spindle Motor 3 HP x 4 P (Standard), 5 HP x 4 P, (2 pcs)(Optional)
Spindle speed (rpm) 50Hz (850-1300), 60Hz (1020-1560 )
Frequency converter 5.5kw~7.5kw(7.5hp~10hp) (Optional)
Air Pressure 6-8 kg/cm2, 120ml/min, 0.6-0.8mpa
Cutterhead Ø12~Ø60 (Standard), Ø25 ~ Ø76 (Optional)
Pipe and bar O.D. outter/I.D. inner angle and end face Ø12~Ø52 (Standard), Ø25~Ø76 (Optional)
Applicable materials Various pipes including steel, iron, stainless steel,
aluminum, bronze
Machine dimensions LxWxH (mm) 2700x1450x1550 3200x1450x1550 3700x1450x1550
Packing dimensions LxWxH (mm) 2970x1550x1830 3300x1520x1600 3800x1520x1600
N.W. 1720 kg 2020 kg 2320 kg
G.W. 1900 kg 2450 kg 2750 kg

* The manufacturer always performs product improvements to achieve the best possible performance. All specifications, dimensions and design characteristics shown in this catalogue are subject to change without notice. Products specifications are based on the actual machines. The manufacturer holds explanation rights.

Normal Method for Pipe End Chamfering:
Chamfering Machine - Automatic Type FHC-700EA

This machine gives accurate angles at the end of workpieces.

- Page Top -