• About Us
• Products
• News
• E-catalog
• Contact Us
• Sitemap
• Home

Sawing Machine, Circular Sawing Machine, Chamfering Machine, Saw Blade Sharpener, Metal Circular Saw

• Metal Sawing Machine
  1. Manual Type
  2. Pneumatic Type
  3. Semi-automatic Type
  4. Hydraulic Semi-automatic Type
  5. Air Automatic Type
  6. Hydraulic Automatic Type
  7. CNC Type
• Aluminum/Brass Sawing Machine
  1. Semi-automatic Type
  2. Hydraulic Semi-automatic Type
  3. Air Automatic Type
  4. Hydraulic Automatic Type
  5. CNC Type
• Fully Automatic Circular Sawing Machine
  1. 360FA Series for Steel Cutting
  2. 360AB Series for Steel Cutting
  3. 400FA Series for Aluminum Copper Cutting
  4. 400AB Series for Aluminum Copper Cutting
• Fully Automatic Tungsten Carbide Sawing Machine
  1. THC-A70NC / THC-B70NC
  2. THC-A130NC / THC-B130NC
  3. THC-165NC
  4. THC-NA168NC
• Metal Circular Pipe / Bar Stock End Chamfering Machine
  1. Semi-automatic Type
  2. Automatic Type FHC-75EA
  3. Automatic Type FHC-85EA
  4. Automatic Type
• Saw Blade Sharpener
  1. HSS Saw Blade Sharpener
  2. TCT Saw Blade Sharpener
  3. Auto Teeth Chamfering Grinding Machine for Circular Saw Blade
  4. Auto Chip Breaker Slot Grinding Machine
• Pipe Shrinking / Expanding Machine
  1. Fully Automatic Pipe Shrinking Machine
  2. Semi-Automatic Pipe Shrinking Machine
• Heat Treatment Steel Cutting Machine
1. MHC-16E-C

Home > Products > Fully Automatic Circular Sawing Machine > 400FA Series for Aluminum Copper Cutting

Fully Automatic Circular Sawing Machine

400FA Series for Aluminum Copper Cutting

Fully Automatic Metal Circular Sawing Machine + Manual Loading Magazine + Automatic Feed + Automatic Cut-Off + Automatic Outfeed

• FHC-400FA
  Single Stopper; The head piece, end piece, and workpieces are outfeed at the front side.
• FHC-400FA-1S
  The workpieces, head and end pieces are outfeed separately.
• FHC-400FA-2S
  Two stoppers, the first and second workpieces are outfeed separately. Head and end pieces are outfeed at the rear side.

MANUAL LOADING MAGAZINE	CENTRALIZED CONTROL PANEL
STEEL CUTTING SAWHEAD	ALUMINUM COPPER CUTTING SAWHEAD

Cutting Capacity:

MODEL		FHC-400FA / FHC-400FA-1S / FHC-400FA-2S
Head Swivel		90°
	mm	70
	mm	90
	mm	75x75

Recommended Pitch of Saw Blade:

SOLID BAR	PITCH	PIPE	PITCH
10 - 15	4 - 6	Thin Pipe	3 - 6
15 - 20	6 - 8	Medium Pipe	6 - 8
20 - 30	8 - 10	Thick Wall Pipe	8 - 12
30 - 50	10 - 12	Choose correct pitch of saw blade for perfect cutting
50 - 70	12 - 14
70 - 80	14 - 16

Specifications:

MODEL	FHC-400FA / FHC-400FA-1S / FHC-400FA-2S
Main Drive Motor	5 HP or 7 1 / 2 HP 50/60 HZ
Blade Speeds	50HZ 3200 RPM 60HZ 3200 RPM
Head Swivel	90°
Clamping Vise	Double
Coolant Pump Motor	40W (1/8P)
Max. Clamping Capacity	150
Saw Blade Size	TIP 355-455 Standard 405
Pin Hole Of Saw Blade	2/11 PCD63
Selective Feeding Speed	0-50 M
Feeding Length	0-2500 mm
Hydraulic Pump Motor	2 HP (1.5 kw)
Operation Pressure	25 -30 kg/cm2
Air Pressure/ Consumption	7Kg/cm2 (120 L /min)
Servo Motor of Feeding	1kw
Table's Height	900 mm
Machine Size (LxWxH)	9500x2400x2000 mm (374"x95"x79") inch
Net Weight	2500 kgs (5500 lbs)

* The manufacturer always performs product improvements to achieve the best possible performance. All specifications, dimensions and design characteristics shown in this catalogue are subject to change without notice. ( Products specifications are based on the actual machines. )

- Page Top -